
ServicesLight Demolition
Light Demolition in Winters
We tear down worn-out decks, fences, patio covers and small outdoor structures, pull the fasteners and footings that come with them, and haul everything away. One person handles your estimate, schedules the crew and checks the cleanup, so you only explain the job once.
Taking down what's past saving
Light demolition is the hands-on work of dismantling a non-structural build outside your home and getting every piece of it off the property. Think of a deck with soft joists, a leaning fence line, a sun-cracked patio cover, an old playset or a hot tub that hasn't run in years. We cut it apart, separate the materials and load it ourselves. You don't rent a dumpster or borrow a truck.
It's the right call when a structure is unsafe or rotted at the base, or simply standing where you want something new. If the whole job is a single backyard shed, our Shed Removal page covers that work in more detail. If a contractor has already done the tearing out and you only need the pile gone, see Construction Debris instead.
From the first phone call to the final sweep, you deal with the same person. That person walks the job with you, writes down exactly what comes out and what stays, and is the one you talk to on demo day.
What the work includes
Decks and stairs
We remove decking boards, rails, joists, beams and stair stringers. Ledger boards bolted to the house come off carefully so the siding and rim behind them aren't torn up.
Fences and gates
Wood pickets, rails and posts come down, along with chain-link fabric and top rail. Posts set in concrete are pulled with the concrete collar attached where the soil allows it.
Patio covers and pergolas
We take down freestanding and attached covers, including lattice, rafters and corrugated panels. Attached covers are unbolted at the ledger rather than pried off the wall.
Hot tubs, playsets and small outbuildings
Spas are cut into sections once the power has been disconnected by an electrician. Swing sets, raised beds and lean-tos are dismantled and loaded the same day.
Haul-away and site cleanup
Every board, screw and broken panel goes on our truck. We separate metal from wood where a facility will take it, then rake and sweep the area and run a magnet over it for loose nails.

Signs it's time to take it down
- Joists that give underfoot
- A deck that bounces or dips usually has rot where the joists sit on the beam or touch the ledger. Once the framing is soft, replacing boards on top doesn't fix it.
- Posts rotted at grade
- Fence and pergola posts fail right where wood meets soil, because moisture and termites work there first. A post you can push by hand is no longer holding anything.
- Brittle, faded covers
- Long, hot summers break down fiberglass and polycarbonate patio panels until they crack and yellow. Brittle panels can shatter in a wind gust.
- Popped fasteners and rust
- Nails backing out of deck boards and rusted joist hangers mean the connections are loosening. That is a safety problem, especially on stairs.
- It's in the way of what's next
- Sometimes the structure is fine but you're putting in a patio, garden or new fence. Clearing the old one first gives your next contractor a clean start.
How a demolition day runs
- 1
Phone call and walk-through
You describe the job by phone, and we set a time to see it. On site we check access, measure the structure, look for utility lines, and note anything that should stay, like a planter bed or the irrigation.
- 2
Written price before we start
You get one number for the whole job, written down with what's included. The price quoted on site is the price you pay, with no hidden fees added later.
- 3
Prep and protection
The crew lays plywood or tarps over lawns and walkways, and sets up a cut zone away from windows. Anything attached to the house is separated by hand first.
- 4
Tear-down and loading
We work top down: covers and rails, then decking, then framing, then posts and footings. Material goes straight from the cut zone to the truck so the yard doesn't fill with debris.
- 5
Cleanup and final check
We rake, sweep and magnet the ground for nails and screws. Your contact walks the area with you before the truck leaves.
What moves the price
Light demolition is priced by labor and by how much material leaves your property. We see the job in person before quoting, because what's underneath a deck or behind a fence often matters more than its size. You'll have the figure in writing before any work starts.
- Size and material
- A deck built from 2x10 framing on 4x4 posts is more wood and more weight than a ground-level platform. Composite decking and concrete are heavier than wood and cost more to dispose of.
- Footings and concrete
- Posts set in concrete take longer to pull and add serious weight to the load. Leaving footings in place is cheaper, and we'll tell you whether that works for your next project.
- Access to the yard
- A wide side gate lets us carry material straight to the truck. Narrow side yards, steep grades or a backyard reached only through a garage add carrying time.
- Attachment to the house
- Structures bolted to a wall need slower, hand-tool work to protect the siding, stucco and flashing. Freestanding builds come down faster.
Light demolition questions
- Do I need a permit to take down a deck or patio cover?
- Removing a small freestanding structure often doesn't need one, but rules vary with what is attached to the house and what is wired or plumbed. We'll flag anything that looks like it needs a permit or a utility shutoff during the walk-through. If it does, we schedule the work after that is handled.
- What happens if you find rot or damage we didn't expect?
- We look under the deck and at the post bases during the estimate so surprises are rare. If the tear-down shows damage to your siding or rim joist behind a ledger, we stop and show you. Our price for the removal doesn't change, and you decide what to do about the wall.
- Can you remove a hot tub that's still wired?
- Not until the power is off. An electrician needs to disconnect the circuit at the panel and the spa's shutoff box first. Once that's done, we drain it, cut the shell into sections and haul it out.
- What if something at my home gets damaged during the tear-out?
- Our business carries commercial general liability coverage and is fully insured, so an accident on the job is covered. We still lay down plywood and tarps over lawns and walkways and separate anything attached to the house by hand, so a claim is never needed.
- Do you take down structures in towns outside Winters?
- We do light demolition across the area, including Davis, Dixon and Woodland. The process and the written price work the same way wherever the job is.

Ready to clear out that old structure?
Tell us what needs to come down and we'll arrange a time to see it. One person stays with your job from the estimate through the final sweep.